News

Compared with traditional ball mill, the energy saving ball mill fan save power 18-25%, lubricant 70% and cooling water 90%, and comprehensively save energy above 20%. Regularly, it doesn`t need to change the main shaft in 10 years, which will save much maintenance fee and labour hours. Main shaft lubrication uses grease, which is convenient and clean and prevents heavy metal pollution.This machine is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control ) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scaleboard. This machine run steadily and works reliably.

Principle of impeller flotation machine and precautions after maintenance The slurry is fed into the impeller by the feed pipe, and the centrifugal force generated by the swirling impeller is thrown into the groove, so that a negative pressure is formed under the cover plate, and the air is automatically taken in by the intake pipe. The inhaled air and the fed slurry are mixed together in the upper part of the impeller and thrown into the tank, thus generating a negative pressure and sucking in the air, thus continuously. In the drug-producing pulp, the floating mineral is carried by the bubble to the surface to form a mineralized foam layer, which is scraped off by the scraper to obtain a concentrate. The minerals and gangues that do not float up enter the intermediate chamber through the gates on the side walls of the trough and are fed into the next flotation tank. The adjustment of the slurry level in each or several tanks is completed by adjusting the gates. The slurry is actually circulating in the machine. After the flotation machine is overhauled, the flotation cell should be carefully inspected and cleaned before the test, and then the empty car test run, and gradually added to the clean water operation (note the size of the circulation hole) until the ore is delivered. At the same time, it should be noted that the impeller body is checked for bias and impact.

The Sand Washing machine is a necessary equipment in Eco-friendly sand production line. It features as below: 1. Simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. 2. Being used for cleaning sand in quarries, it has many advantages compared with traditional spiral sand washing machine: There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. It has longer service life and lower maintenance frequency.

Dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation. This machine is mainly used in ore selecting, building materials, metallurgy and chemicals to dry the materials with certain moisture and size. The rotary drier has a strong adaptability which can dry many kinds of materials with a simple operation method and security trait, so it is widely used.

Froth Flotation Cell main components of the impeller, rotor, spindle.The re-equipping equipment for the ore-bearing ores includes jigs, shakers, etc. The quartz ore flotation machines are used for coarse-grained inlaid ores. For re-election, the shaker is used for the re-selection of fine-grained intarsia ore, and for the beneficiation of coarse or fine intarsia ore, a jig and shaker combined equipment configuration can be used to obtain a higher economy. Mineral processing indicators. Quartz ore flotation machine is mainly composed of impellers, rotors, spindles and other components. The parts of the flotation machine determine the quality of the flotation machine, which in turn determines the quality of the sand production. Good parts can improve the flotation machine. quality. First of all, the flotation machine spindle and the flotation machine spindle assembly are composed of a bearing seat, a main shaft, and a bearing. The structure of the vortex crushing cavity of the high-efficiency flotation machine vortex crushing cavity is an annular space composed of two cylinders of upper and lower parts. The impeller rotates at a high speed in the vortex crushing cavity, and the turbulent crushing cavity can also store materials. Material lining, material crushing process occurs in the vortex crushing cavity, the material lining breaks the crushing action vortex crushing cavity wall, so that the crushing effect is limited to the material, play a role of self-lining.

Brief introduction of froth flotation cell Flotation Machine can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine. It features: high inhalation, low power. Each chute can inhale gas, sink magma, separate. There is no need of accessory equipments horizontal equipment. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface. It is easy to adjust. The upward one makes the magma cycle toward upward, which the downward one makes the magma cycle downward.

High gradient magnetic separator principle High-gradient magnetic separator adopts rotating vertical rotating and recoil concentrates, and is equipped with high-frequency vibration mechanism. It fundamentally solves the problem that magnetic media of flat ring magnetic magnetic separators and high-gradient magnetic separators of the ring ring are easy to block. Worldwide technical problems. It has the advantages of large enrichment ratio, strong adaptability to the feed material, concentration and product fluctuations, reliable work, and convenient operation and maintenance. During work, after the ore slurry flows into the tank through the feeding box, under the action of the water flow of the ore-supplying water pipe, the ore grains are loosened and enter the feeding zone of the tank body. Under the action of a magnetic field, the magnetic ore particles undergo magnetic polymerization to form a "magnet group" or "magnetic chain", and the "magnet group" or "magnetic chain" is subjected to magnetic force in the pulp to move toward the magnetic pole and is adsorbed in the cylinder. on. Since the polarities of magnetic poles are alternately arranged in the direction of rotation of the cylinder and they are fixed during operation, when the [magnet group" or [magnetic linkage" rotates with the cylinder, magnetic stirring occurs due to alternating magnetic poles and is mixed. Non-magnetic minerals such as gangue in the "magnet group" or "flux chain" fall off during turning, and the "magnet group" or "magnetic chain" absorbed by the cylinder surface is the concentrate. Concentrate with the cylinder to the edge of the magnetic system is the weakest point of the magnetic force, in the discharge flow of the unloading water pipe is discharged into the concentrate tank. Non-magnetic or weakly magnetic minerals are left in the slurry as tailings out of the slurry.

Brief introduction of small jaw crusher Jaw crusher is mainly used for medium-sized crushing of various ore and bulk materials. Jaw Crusher is widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industries. Crushed material is the highest compressive strength of 320MPa. Small jaw crusher Features: Broken ratio, product size uniformity, simple structure, reliable, easy maintenance, low operating costs. Jaw crusher works: Work, the motor driven by the eccentric pulley shaft rotation, the moving jaw periodically close to leave the set jaw, so the material is squeezed, rubbing, grinding and other multiple crushing, the material from big to small, Gradually fall until discharged from the discharge port.

The performance characteristics of the impact crusher: The impact crusher is rotated by the rotor at a high speed. After the material enters, it collides with the plate hammer on the rotor and then it is broken. Then it is counterattacked and crashed into the liner again and discharged from the discharge port. Impact crusher combines impact, counterattack, centrifugal impact, shear, and grinding together. It has the characteristics of high crushing efficiency, fine and uniform material discharge, less vulnerable parts, convenient maintenance, and low energy consumption. Currently, impact crushers are divided into vertical and horizontal types. Self-percussion crusher consists of vortex crushing cavity, feeding and distributing device, rotor vortex cutter, power transmission device and frame. Self-percussion crushers use the crushing between stone and stone. A part of the stone obtains kinetic energy through a high-speed rotating device, and the other part is impacted and broken by falling stones. The stone in the crushing cavity is formed into a stone-lined self-lining. The prominent features of the self-impact crusher are mainly the crushing between the stone and the stone, which greatly reduces the wear and tear of the equipment, reduces maintenance, and prolongs the life of the equipment.

Ball mill structure features: The ball mill consists of main parts such as feeding part, discharging part, turning part, transmission part (reducer, small transmission gear, motor, and electric control). The hollow shaft is made of cast steel and the inner lining can be replaced. The slewing bull gear is processed by casting hobbing. The barrel body is inlaid with a wear-resistant liner and has good wear resistance. The machine runs smoothly and reliably.

The motor transmits through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when mobile jaw moving. So the mobile jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

Zoneding ball mill is a key equipment to grind the crushed materials, which is widely used in the manufacture industries,such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics.

Intermittent Ball Mill, also called ceramic ball mill or batch ball mill, was going to ship to Laos. The Ceramic Ball Mill is suitable for dry grinding to produce super fine powder and the final product size can reach up to 1000-16000 mesh. Zoneding Batch Ball Mill capacity ranges from 0.2-15 t/h, so it is widely used to grind materials with small size requirement and small production capacity requirement. Intermittent Ball Mill Delivery Site

One set Jaw Crusher for stone production line is ready for packaging and shipping in our factory. Stone Jaw Crusher is mainly used as primary and secondary crushing equipment in stone crushing plant or ore dressing plant. We have two types jaw crusher, PE Jaw Crusher and PEV Jaw Crusher for your choice. ZoneDing Machine has many years of domestic and international experience in the crusher designing, manufacturing and installation. We welcome you to contact us online or visit our factory.